qmobile a10 flash file sc6531 flash file without password

 qmobile a10 flash file sc6531 flash file without password

Card found : 08943874 , v0153
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : C000 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : A000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : 0000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_176D070C8FD9_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!

Operation : Read Flash [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Platform Version: MOCOR_12C.W13.04.22_Release
Project Version:   SC6531_BAR
HW Version:        SC6531_BAR
Saved to : C:\Users\88017\Desktop\MOCOR_12C.W13.04.22_Release.bin

Done!
Elapsed: 00:00:55

Reconnect Power/Cable!